Sand Blasting Systems

SANDBLASTING

Sand blasting is also known as abrasive blasting, which is a generic term for the process of smoothing, shaping and cleaning a hard surface by forcing solid particles across that surface at high speeds; the effect is similar to that of using sandpaper, but provides a more even finish with no problems at corners or crannies. Sandblasting can occur naturally, usually as a result of particles blown by wind causing aeolian erosion, or artificially, using compressed air. It is used for the cleaning of the surfaces, before the powder or paint spraying process is applied.

 

Efficient and Safety Sand Blasting.

S-R LINE

SAND BLASTING ROOMS

A blast room is a much larger version of a blast cabinet. Blast operators work inside the room to roughen, smooth, or clean surfaces of an item depending on the needs of the finished product. Blast rooms and blast facilities come in many sizes, some of which are big enough to accommodate very large or uniquely shaped objects like rail cars, commercial and military vehicles, construction equipment, and aircraft.

Each application may require the use of many different pieces of equipment, however, there are several key components that can be found in a typical blast room:

  • An enclosure or containment system, usually the room itself, designed to remain sealed to prevent blast media from escaping
  • A blasting system; wheel blasting and air blasting systems are commonly used
  • A blast pot — a pressurized container filled with abrasive blasting media
  • A dust collection system which filters the air in the room and prevents particulate matter from escaping
  • A material recycling or media reclamation system to collect abrasive blasting media so it can be used again; these can be automated mechanical or pneumatic systems installed in the floor of the blast room, or the blast media can be collected manually by sweeping or shoveling the material back into the blast pot

Additional equipment can be added for convenience and improved usability, such as overhead cranes for maneuvering the workpiece, wall-mounted units with multiple axes that allow the operator to reach all sides of the workpiece, and sound-dampening materials used to reduce noise levels.

S-V LINE

SAND BLASTING cabınet

What is Sandblasting Cabinet?
Pressure shot blasting cabins; It is produced for manual or automatic sandblasting of small parts.

In manual machines, the operator sands the sandblasting gun after placing the part to be sandblasted into the machine.

In automatic machines, sandblasting guns are fixed in the machine at suitable angles and height, the operator starts the machine after putting the material to be sanded and sands the part.

In addition to our standard size sandblasting cabin production, we are able to produce sandblasting cabinets where two operators can work simultaneously or in larger sizes.

You can easily place the blasting cab anywhere in your production area. Sandblasting cabinet does not emit dust, dust is kept completely in machine filters.

Please contact us for information about the advantages of Elboy shot blasting cabins.

Sandblasting Cabinet Technical Specifications

Air Consumption: 300-1000 lt / min
Working Pressure: 2-12 Bar
Abrasive Type: Glass Sphere (Glass sand), Aluminum oxide etc.

 

  WORKING SPACE (mm )  900 X 700 X 720
  EXTERNAL DIMENSIONS (mm)  950 X 1150 X 2000
  DOOR DIMENSIONS ( a x h mm )  580 X 590
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 1 PIECE
  AIR CONSUMPTION ( m3 /dk )  1 m3 / min ( 1000 lt/dk )
  ELECTRICTY   380 W
 

Sandblasting Cabinet Technical Specifications

Air Consumption: 300-1000 lt / min
Working Pressure: 2-12 Bar
Abrasive Type: Glass Sphere (Glass sand), Aluminum oxide etc.

 

  WORKING SPACE (mm )  1000 X 800 X 750
  EXTERNAL DIMENSIONS (mm)  1100 X 1250 X 2000
  DOOR DIMENSIONS ( a x h mm )  670 X 630
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 1 PIECE
  AIR CONSUMPTION ( m3 /dk )  1 m3 / min ( 1000 lt/dk )
  ELECTRICTY  380 W
  TURNET DIAMETER  420 mm. 
  TURNET WEIGHT CAPACITY  350 kg
  LOADING TROLLEY  Exist

Sandblasting Cabinet Technical Specifications

Air Consumption: 300-1000 lt / min
Working Pressure: 2-12 Bar
Abrasive Type: Glass Sphere (Glass sand), Aluminum oxide etc.

 

  WORKING SPACE (mm )  1300 X 1000 X 1000
  EXTERNAL DIMENSIONS (mm)  1400 X 1450 X 2100
  DOOR DIMENSIONS ( a x h mm )  860 X 780
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 2 PIECES
  AIR CONSUMPTION ( m3 /dk )  1 m3 / min ( 1000 lt/dk )
  ELECTRICTY  380 W
  TURNET DIAMETER  420 mm. 
  TURNET WEIGHT CAPACITY  350 kg
  LOADING TROLLEY  Exist

Sandblasting Cabinet Technical Specifications

Air Consumption: 300-1000 lt / min
Working Pressure: 2-12 Bar
Abrasive Type: Glass Sphere (Glass sand), Aluminum oxide etc.

  WORKING SPACE (mm )  1800 X 1000 X 1000
  EXTERNAL DIMENSIONS (mm)  1900 X 1450 X 2100
  DOOR DIMENSIONS ( a x h mm )  860 X 780
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 2 PIECES
  AIR CONSUMPTION ( m3 /dk )  1 m3 / min ( 1000 lt/dk )
  ELECTRICTY  380 W
  TURNET DIAMETER  420 mm. 
  TURNET WEIGHT CAPACITY  350 kg
  LOADING TROLLEY  Exist

Sandblasting Cabinet Technical Specifications

Air Consumption: 3000-4000 lt / min
Working Pressure: 4-6 Bar
Abrasive Type: Glass Sphere (Glass sand), Aluminum oxide,Steel Musket, Steel Grit etc etc.


S-V-P-1000

  WORKING SPACE (mm )  1000 X 800 X 750
  EXTERNAL DIMENSIONS (mm)  1100 X 1250 X 2700
  DOOR DIMENSIONS ( a x h mm )  670 X 630
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 1 PIECE
  AIR CONSUMPTION ( m3 /min )  3 – 4  m3 / min
  ELECTRICTY  380 W
  TURNET DIAMETER  420 mm.
  TURNET WEIGHT CAPACITY  350 kg
  LOADING TROLLEY  Optional


S-V-P-1300

  WORKING SPACE (mm )  1300 X 1000 X 1000
  EXTERNAL DIMENSIONS (mm)  1400 X 1450 X 2800
  DOOR DIMENSIONS ( a x h mm )  860 X 780
  FILTER TYPE AND QUANTITY  CARTRIDGE FILTER – 2 PIECES
  AIR CONSUMPTION ( m3 /min )  3 – 4  m3 / min
  ELECTRICTY  380 W
  TURNET DIAMETER  420 mm.
  TURNET WEIGHT CAPACITY  350 kg
  LOADING TROLLEY  Optional

P-V LINE

ABRESIVE RECOVERY UNIT

PROTON P-V LINE 
Abresive Recovery Units

PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions.The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..  The dust in the air is collected by Vacuum Cleaner, the grit in the Stock Silo by its seperator.

Especially in inaccesable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower. A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials. This versatile vacuum system can be used to pick up any material that will flow through a hose. With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindirical and Square having 2 floors.

Technical Specifications for standard machines:

VC Unit’s cost-cutting power has been proven hundreds of times.In fact, most VC units pay for themselves in less  than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors from 7,5kW-90kW(3,98m³/min-72m³/min).Performance data for air (p₁=1,0 bar,  t₁=20 °C, ρ=1,2 kg/m³)